FLY-Lite2 Usage Precautions

Read before operating

Before any wiring operation, be sure to turn off the printer and disconnect the power. When flashing firmware, also follow the corresponding guide.

1. Power Requirements

• Type-C Power Supply: A power adapter with 5V/2A or higher output is required.
• Terminal Power Supply: Connect an external 5V DC power source via the ZH-1.5-2P terminal.
  Note

  The LITE series does not support drawing power from the mainboard; an independent power supply must be used.

2. Storage Configuration

Important

The LITE series does not include storage devices from the factory; you must provide a Micro SD (TF) card to boot the system.

• Capacity Requirement: A Micro SD card of 16GB ~ 128GB is recommended.
• Speed Requirement: The memory card speed needs to be C10 or above

---