Skip to main content

FLY-Lite2.1 Usage Precautions

Read before operating

Before any wiring operation, be sure to turn off the printer and disconnect the power supply. Please also follow the corresponding guide when flashing firmware.

1. Interface Description​

The following figure shows the layout diagram of each interface on the motherboard for quick reference:

Loading...

2. Power Requirements​

  • Type-C Power Supply: A power adapter with 5V/2A or higher output is required.
  • Terminal Power Supply: Connect an external 5V DC power source through the ZH-1.5-2P terminal.
    Note

    The LITE series does not support drawing power from the motherboard; an independent power supply must be used.

3. Storage Configuration​

Important

The LITE series does not include storage devices from the factory. You must provide your own Micro SD (TF) card to start the system.

  • Capacity requirement: A Micro SD card of 16GB to 128GB is recommended.
  • Speed requirement: The memory card speed must be C10 or higher.
Loading...