Host Power Supply Method

Power Off Operation

Before starting, completely turn off the printer and disconnect the power supply. Do not plug or unplug wiring harnesses, organize interface cable routing, or touch terminals while the power is on.

Tip

The Fly-Pi-lite2 series supports the following two power supply methods. Please choose one according to your actual needs.

1. Power Supply via 5V DC Power Source

• Please use a dedicated power terminal to connect to the DC power source. The recommended voltage is 5V.
• The power connector model is ZH-1.5-2P. Please refer to the diagram below for wiring:
• Please Note: The LITE series does not support being powered through the mainboard.
  Loading...

2. Power Supply via Type-C Interface

• Power can be supplied directly through the Type-C interface. It is recommended to use a power adapter with an output of no less than 5V/2A.
• The wiring diagram is as follows:
  Loading...

---