🚀 Quick Start
🎯 Goal of this guide: Complete the system deployment and firmware flashing for the Fly-Pi-lite series mainboard within 30 minutes, bringing it to a state where it can connect to Klipper and perform basic tests.
✅ Completion indicator: Access the Klipper interface via a web browser.
📍 Important Notes
- 📦 Required Accessory: The Fly-Pi-lite series must be used with a TF card, otherwise the system will not boot.
- ⚡ Power Requirements: Input voltage range is 5V. Do not exceed this range.
- 🔌 Safe Operation: Always disconnect power before performing any wiring operations! Also, follow the guide's instructions when flashing firmware.
- 🔧 Tool Preparation: Prepare basic tools such as a screwdriver and data cables in advance.
📦 Step 1: Prepare Tools and Resources
Loading...
📝 Contents Included
MobaXterm(for connecting to the host computer)CH340(serial port driver for system connection)Panasonic_SDFormatter(for formatting TF cards)SetupSTM32CubeProgrammer(for flashing the lower computer firmware)
🖥️ Step 2: Install System and Basic Configuration
1. System Image Flashing
2. System Basic Configuration
3. Network and Remote Connection
4. Display Device Configuration
5. Host Computer Power Supply
📝 Notes for This Step
- Ensure the TF card or M2WE is correctly formatted before flashing the image.
- The first system boot may take 3-5 minutes; please be patient.
- Default SSH login: username: root, password: mellow.
- Screen configuration is only necessary if you have a screen device.
📈 Step 3: Extended Features and Advanced Configuration (Optional)
The following features can be configured step by step as needed after completing the basic setup and ensuring the printer can operate normally:
📝 Extended Features and Advanced Configuration
Loading...