Quick Start
Goal of this guide: Within 30 minutes, complete the system deployment and basic configuration of the FLY-Lite2.1, bringing it to a state where the Klipper web interface is accessible.
Completion indicator: Access the Klipper web interface through a browser.
Important Notes
- Required accessory: FLY-Lite2.1 must be used with a TF card, otherwise the system cannot boot
- Power requirements: Only supports 5V input, do not connect higher voltages
- Safe operation: The printer must be turned off and disconnected from power before any wiring operations
- System startup: For the first boot, it is recommended to complete configuration via SSH over the network
Step 1: Prepare Tools and Resources
Loading...
Included contents:
MobaXterm- Used to connect to the hostCH340- Serial driver used for system connectionPanasonic_SDFormatter- Used to format the TF cardSetupSTM32CubeProgrammer- Used to flash firmware to the controller
Step 2: Install System and Basic Configuration
| Configuration Item | Description | Link |
|---|---|---|
| System image flashing | Flash the FlyOS system image | View Guide |
| Basic system configuration | Modify system settings | View Guide |
| SSH connection | Remotely connect to the host | View Guide |
| Wi-Fi configuration | Configure wireless network | View Guide |
| Screen configuration | Configure display device (optional) | View Guide |
| Host power supply | Choose the correct power method | View Guide |
Notes:
- Please confirm the TF card has been properly formatted before flashing the image
- The first system boot may take 3-5 minutes, please be patient
- The default SSH username is
root, and the password ismellow
Step 3: Extended Features and Advanced Configuration
The following features can be configured step by step as needed after completing the basic setup and ensuring the printer operates normally:
| Feature | Description | Link |
|---|---|---|
| Camera usage | USB camera configuration | View Guide |
| Power loss recovery | Print optimization feature | View Guide |
| Resonance compensation | Input shaping using accelerometer | View Guide |
| External toolboard | Toolboard connection and ID retrieval | View Guide |
| Resource download | 3D models and schematics | View Guide |
Recommendations:
- It is recommended to configure and test extended features one by one to avoid changing too many parameters at once
- Camera configuration requires additional USB camera device support
- Resonance compensation requires an accelerometer sensor
- Toolboard connection is suitable for multi-toolhead 3D printers
Loading...