Quick Start
Guide Objective: Complete the installation of the FLY-CM4, Raspberry Pi CM4 compute module, system storage, and basic peripherals.
Completion Criteria: The Raspberry Pi CM4 system can boot normally, and can be connected to a screen, camera, or CAN tool board as needed.
Important Notes
- Required Accessories: FLY-CM4 requires the Raspberry Pi CM4 compute module and corresponding system storage
- Power Requirements: DC input range is 12V-24V, do not exceed this range
- Safe Operation: Always power off the printer and disconnect the power supply before any wiring or DIP switch operations
- System Difference: FLY-CM4 uses the Raspberry Pi system flow, and does not apply to the FlyOS Fast image of other FLY host boards
Step 1: Install the System and Storage
| Configuration Item | Description | Link |
|---|---|---|
| CM4 System Flashing | Flash the system for the Raspberry Pi CM4 | View Guide |
| TF Card Installation | Install the system storage card | View Guide |
Step 2: Configure Display and Camera
| Function | Description | Link |
|---|---|---|
| HDMI Screen | HDMI screen wiring | View Guide |
| DSI Screen | DSI screen wiring and usage | View Guide |
| CSI Camera | CSI camera wiring and usage | View Guide |
Step 3: Extended Functions and Resources
| Function | Description | Link |
|---|---|---|
| External Tool Board | Obtain the mainboard USB ID and CANBus UUID | View Guide |
| Resource Downloads | 3D models and schematics | View Guide |
Loading...