Tip

• Super8 uses a TF card for firmware flashing by default
• Please prepare a TF card with a capacity no larger than 32G
• Off-brand memory cards may cause flashing failures; please try to use the recommended memory cards below to update the firmware
• The transfer speed of the TF card should ideally be class10 class or class10 class or higher; it is recommended to use TF cards from brands such as SanDisk

Firmware Flashing Instructions

Selecting the Firmware Type

Please confirm the connection method first

• If not using a CAN tool board: select USB firmware.
• If a CAN tool board is required: select USB-to-CAN Bridge Firmware.
• You can only choose one of the two firmware types; do not flash both at the same time; the Super8 firmware is flashed using a TF card.

Firmware Type	Applicable Scenario	Advantages	Confirm Before Selecting	Operation
USB Firmware	When not using a CAN tool board	Stable communication, simple configuration	When not using a CAN tool board, use the USB firmware	Compile USB Firmware
USB to CAN Bridge Firmware	When a CAN tool board is required	Can connect multiple CAN devices, reduces USB usage	Select only when a CAN tool board is needed; confirm that CAN wiring, termination resistors, and CAN baud rate configuration are consistent	Compile USB to CAN Bridge Firmware