Skip to main content

Super5 Pro

Product Specifications

  • Uses ARM Cortex-M7 series STM32H723ZGT6 main control chip with a 32-bit core running at 550 MHz
  • Firmware: Marlin 2.0/Reprap/Klipper
  • Driver support: A4988, LV8729, DRV8225, TMC2208/2209/5160, etc.
  • Driver mode support: TMC: UART/SPI
  • 5 high-voltage driver slots, supports 5 independent motor drivers
  • Display: Serial touchscreen, mini12864 LCD, 12864 LCD, 2004 LCD, FLY 4.3/7.0 V1
  • 1 high-voltage IN port, supports auto bed leveling sensors such as BLTouch, PL08N proximity sensor, Klicky, Voron Tap, etc.
  • Optional limit switch power supply: 5V/12V/24V
  • Using Repap firmware, the onboard ESP32 WiFi module supports up to 1.6m/s
  • Unique PWM Fan MOS board design, easily replaceable if damaged, reducing customer repair difficulty; two 2-pin fan interfaces support 4-pin PWM fans
  • PCB uses 2OZ copper thickness to support higher current
  • 3 ADC interfaces, supporting up to three thermistor channels
  • 7 IO interfaces that can be used for leveling and limit switches
  • 3 heating rod interfaces, supporting up to three heating rods

Notes

Output PortMaximum Current at 24VMaximum Current at 12V
Bed Output15A7.5A
Heater Output6A3A
Fan Output1A0.5A
Loading...
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -