Screen Wiring and Configuration

Screen Wiring

TFT Resistive Screen Wiring

TFT Resistive Screen Wiring

tip

• The TFT screen package includes two FPC flexible cables: one is 14P (narrow) and the other is 16P (wide)
• Please use the 14P (narrow) cable for resistive screens!!!

FLY-Gemini TFT V1 resistive screen wiring

FLY-Gemini TFT V2 resistive screen wiring

TFT V1 Wiring with Ribbon Cable

TFT Resistive Screen Wiring

tip

• Pay attention to the correct wire sequence!

1. Install the TFT screen

Wire sequence

Connection method

HDMI Wiring

HDMI Wiring

1. FLY-HDMI-LCD5 screen wiring

---

Screen Configuration

FLYOS-FAST System - Screen Configuration

FLYOS-FAST System - Screen Configuration

1. Open the device's IP address in a browser, for example: http://192.168.6.110/

   fluidd: As shown below: Uncheck -> Filter hidden files and folders.

   mainsail: As shown below: Check -> Show hidden files.

2. You can now see the .flyos-config folder. Enter this folder and locate the sys-config.conf file.

3. Open the sys-config.conf file. Modify the required configuration items and then click Save -> Close.

warning

• For HDMI screen, set as: hdmi. Note that there must be no space after the = sign!
• For resistive screen, set as: fly-tft-v1. Note that there must be no space after the = sign! Ensure the switch on the back of the screen is set to Resi.
• For klipper_screen, set as: 1. Note that there must be no space after the = sign!
• Note: The configuration format in the sys-config.conf file must be key=value. Do not modify the format!!! Otherwise, the configuration will not take effect!!!

4. After saving the changes, restart the system to apply the new configuration.

FLYOS-Armbian System - Screen Configuration

FLYOS-Armbian System - Screen Configuration

info

• After connecting the host computer to WiFi and obtaining its IP address, enter IP+:9999 in the browser to access FLY TOOLS and configure the screen.
• For example, if the host computer's IP address is 192.168.6.110, enter 192.168.6.110:9999 in your browser.

1. Open FLY TOOLS. As shown in the image below, enable Klipper Screen, select the screen model, click the pink button at the bottom right corner labeled Save Configuration, and then restart the host computer to apply the changes!

warning

• For resistive screen, select: fly-tft-v1. Ensure the switch on the back of the screen is set to Resi.
• For hdmi screen, select: hdmi.

Resistive screen:

HDMI screen:

2. After saving the configuration, restart the host computer to apply the changes!

---