Skip to main content

View Motherboard ID

Important Note
  • This tutorial applies only to the ID reading and viewing methods for the Gemini V2 motherboard.
  • If you are using a CAN tool board, please refer to the ID search instructions in the corresponding tool board product documentation.
  • If you have flashed a USB firmware, please refer to Obtaining USB ID.
  • If you have flashed a USB-to-CAN firmware, please refer to Obtaining CANBus UUID.
  • When using CANHAT, multiple UUIDs may appear for both the motherboard and the tool board. It is recommended to first search for the Gemini V2 motherboard’s own UUID without connecting the CAN tool board, and then connect it after confirmation.

ID Search Steps​

Which firmware is flashed on your slave device

Loading...