Extend LED Driver via Plugin

You need to connect to the host computer via SSH and follow the link below for installation and configuration.

https://github.com/julianschill/klipper-led_effect

Installation

Please use an SSH tool such as MobaXterm_Personal to connect to your host computer via WIFI, and ensure the following points:

1. Make sure the Klipper firmware is installed on the host computer.
2. Ensure the logged-in user is the one who installed Klipper.
3. Ensure your input method is set to English.
4. Ensure your host computer can detect devices normally.
5. Ensure all the above precautions are taken; otherwise, you cannot proceed to the next step.

This module can be installed into an existing Klipper installation using the installation script.

cd ~
git clone https://github.com/julianschill/klipper-led_effect.git
cd klipper-led_effect
./install-led_effect.sh

Reference Configuration

[neopixel TP_led]
pin: PB7
chain_count: 25
# Number of LEDs
# Number of LED beads
color_order: GRB
initial_RED: 0.4    
initial_GREEN: 0.8
initial_BLUE: 1
initial_WHITE: 0.0
#66CCFF 

[led_effect sb_nozzle_cooling]
autostart:              false
frame_rate:             24
leds:
    neopixel:TP_led (9,10)
layers:
        breathing  3 1 top (0.0, 0.0, 1.0, 0.1)

[led_effect rainbow]
leds:
    neopixel:TP_led
autostart:                          true
frame_rate:                         24
layers:
    gradient  0.3  1 add (0.3, 0.0, 0.0),(0.0, 0.3, 0.0),(0.0, 0.0, 0.3)