Firmware Flashing Instructions
Host Connection Instructions
Core Connection Limitation
The Fly-D5 mainboard can only communicate with the host via the Type-C USB interface for Klipper.
Loading...
Connection Requirements:
- Use a high-quality Type-C data cable to ensure stable data transmission.
- It is recommended to avoid using excessively long data cables (not exceeding 1.5 meters).
- Connect to a standard USB-A port on the host.
How to Choose the Correct Firmware
🔧 Firmware Selection Rules
Please select the correct firmware according to your connection method and toolboard type, following these rules:
| Configuration Scenario | Mainboard Firmware | Toolboard Firmware | Key Notes |
|---|---|---|---|
| Not using a toolboard (Direct USB connection) | USB Firmware | — | The most common configuration, suitable for most single-extruder printers. |
| Using a CAN toolboard | CAN Bridge Firmware | CAN Firmware | Communication via CAN bus. Please note: The mainboard must be flashed with CAN bridge firmware, otherwise a USB-to-CAN adapter (such as UTOC) is required. |
Loading...