BL firmware
tip
- Please note that the
bootloaderhas been pre-flashed at the factory and does not need to be re-flashed - C8P can only be flashed using the built-in host
SSH into the host
Warning
- Before flashing the BL firmware, use
wifi to connect to the host SSH
- First please: using wifi to connect to the host ssh
Flashing the firmware
-
Set the dip switch upwards and connect the lower machine USB to the host
-
Enter the following command to start flashing BL
fly-flash -d c8p -u -f /usr/lib/firmware/bootloader/hid_bootloader_h723_v1.0.bin
Loading...