BL firmware

Tip

• Please note that the bootloader is pre-flashed at the factory, so there is no need to flash it again.
• The C8P can only be programmed using its built-in host computer.

SSH connect to the host computer

Warning

• Before flashing the BL firmware, you need to connect to the host computer via SSH using WiFi

• First: Connect to the host computer via SSH using WiFi

---

Flash Firmware

• Flip the DIP switch upward and connect the lower computer's USB to the host computer.

  Loading...

• Enter the following command to start flashing BL

  fly-flash -d auto -u -f /usr/lib/firmware/bootloader/hid_bootloader_h723_v1.0.bin

Loading...