BL Firmware

tip

• Please note that the bootloader is pre-installed at the factory and does not need to be re-flashed.
• C8P can only be flashed using the built-in host.

SSH Connect to the Host

Warning

• Before flashing the BL firmware, you need to connect to the host SSH via wifi.

• First, please: Connect to Host SSH via Wifi

---

Flash Firmware

• Toggle the DIP switch upward, and connect the lower computer USB to the host.

  Loading...

• Enter the command below to start flashing the BL.

  fly-flash -d auto -u -f /usr/lib/firmware/bootloader/hid_bootloader_h723_v1.0.bin

Loading...