Skip to main content

Motherboard Notes

Power Indicator Lights

  • At least two lights (3.3V and 5V) should illuminate when only powered via TYPE-C without connecting other motherboard power sources
  • After connecting the motherboard power, the lights for 3.3V, 5V, and VCC should illuminate

Troubleshooting

Note
  • Without any external devices connected (drivers, limit switches, 12864 displays, etc.)
  • Only when powered via TYPE-C, the 3.3V light should remain steadily on
  • If the 5V light does not illuminate after connecting the motherboard power and driver power, please contact customer support

Drivers

  • The motherboard supports external drivers Wiring and Configuration Guide

Limit Switch Ports

  • Please pay attention to the wiring sequence. For three-wire limit switches, ensure correct connections for 5V, GND, and S. Incorrect wiring may damage the motherboard
  • For two-wire limit switches, simply connect S and GND
  • PL08 and other proximity switches require an external diode on the signal pin to reduce the voltage to below 3.3V
Loading...
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -