Boot Interface

Loading...

First Interface

Notes

• The system needs to support ECM or Rndis, otherwise it cannot be used normally
• This product is specifically designed for Klipper and requires Moonraker service to display IP and resources. Otherwise, you need to open the backend and configure SSH mode for use

• The IP display will show information read from the connected machine. If the IP cannot be read or is not detected, it will prompt
  Loading...
• When the IP is successfully read, the following interface will appear (IP displayed depends on the host machine)
  Loading...

Second Interface

• Displays the CPU and memory usage of the connected machine
  Loading...

Third Interface

• Displays the services running on the host machine. Note that these are Klipper-related services
• A red dot appears before the service if it is not started
• A blue dot appears before the service if it is started
  Loading...