Model Download and Print Assembly

Model Download and Instructions

Model File Name	Description
pcb_cover.stp	PCB cover
switch_sensor_trigger_block.stp	Filament runout detection trigger block
rear_cover.stp	Rear cover
upper_cover.stp	Upper cover
main_body.stp	Main body
encoder_3_5.8mm.stp	Encoder disk, 3 slots, minimum detection distance 5.8mm `Can be used for high-flow (greater than 20 mm³/s) printing`
encoder_5_3.5mm.stp	Encoder disk, 5 slots, minimum detection distance 3.5mm `Moderate, recommended`
encoder_10_1.73mm.stp	Encoder disk, 10 slots, minimum detection distance 1.73mm `Can be used for low-speed high-precision printing` Limited by the sampling rate limit of filament detection in 3D printer firmware

Model Printing Notes

The outer shell is not recommended to be printed using PETG or transparent materials, as it may affect sensor detection.