Model Download and Print Assembly

Model Download and Instructions

Model File Name	Description
pcb_cover.stp	PCB Cover
switch_sensor_trigger_block.stp	Material Detection Trigger Block
rear_cover.stp	Rear Cover
upper_cover.stp	Upper Cover
main_body.stp	Main Body
encoder_3_5.8mm.stp	Encoder Disk, 3 Channels, Minimum Detection Distance 5.8mm `Use this for high flow (greater than 20 mm³/s) printing`
encoder_5_3.5mm.stp	Encoder Disk, 5 Channels, Minimum Detection Distance 3.5mm `Moderate, recommended`
encoder_10_1.73mm.stp	Encoder Disk, 10 Channels, Minimum Detection Distance 1.73mm `Use this for low speed and high precision printing` Limited by the sampling rate of 3D printer firmware material detection

Notes on Model Printing

The housing is not recommended to be printed with PETG and transparent materials, as it may affect the sensor's sensing.