Configuration Function Description
The LLL PLUS Buffer supports connection to a computer via a Type-C interface for parameter configuration and firmware upgrades using a serial port tool.
Preparations
1. Download Serial Port Tool
Download Serial Port Tool Assistant2. Connect the Device
- Connect the buffer to the computer using a USB cable.
- Open the Serial Port Tool Assistant.
- Select the corresponding port number.
- Set the baud rate to:
115200. - Click Connect.
Loading...
Basic Parameter Configuration Table
| Function Description | Configuration Command | Default Value | Unit | Remarks |
|---|---|---|---|---|
| View All Parameters | Loading... | - | - | Read all current configurations |
| Set Motor Current | Loading... | 500 | mA | Set the motor operating current |
| Query Motor Current | Loading... | - | - | Query the current motor current value |
| Set Running Speed | Loading... | 260 | RPM | Set the buffer running speed, maximum 500 (requires firmware V1.1.1 or above) |
| Set Timeout Duration | Loading... | 60000 | ms | Set the auto-stop time for no-trigger state to prevent continuous extrusion |
Operation Guide
Send Configuration Commands
- Copy Command: Click the copy button next to any command in the table above.
- Paste to Send Area: Paste the command into the send area of the serial port tool.
- Click Send: Click the send button to execute the command.
Verify Configuration Results
Send the info command to view all current parameter values and verify if the configuration has taken effect.
Loading...