FLY-ALPS Firmware Update

Applicable Version

This document applies to devices with firmware version >= v2.0.0. This version can be updated directly via the web tool without entering DFU mode. If your firmware version is lower than this, please refer to the Firmware Flashing documentation.

Check Firmware Version

Via the Web Tool, you can view the current firmware version after connecting the device.

Firmware Download

You can obtain the firmware through the following links:

• Download Firmware Package – Directly download the latest firmware archive

Please Note

The archive must be extracted before use.

• Repository Address – Visit the firmware repository

The current firmware is located in the following path within the archive:

FLY-Firmware/ExtensionBoard/ALPS/Product-Firmware

Update Steps

1. Connect the device to your computer using a Type-C cable that supports data transfer.
2. Visit the FLY-ALPS Firmware Update Tool.
3. Click the Burn Firmware button.
4. Click Select Device, choose FLY-ALPS from the pop-up list, and then click Connect.
5. After a successful connection, you can view the current firmware version on the tool page.
6. Click Select Firmware, browse and select the downloaded firmware file.
7. Click Start Burning, and wait for the process to complete.
8. The device will automatically restart after a successful burn.

Note

Do not disconnect the Type-C cable during the update process, as this may cause the burn to fail.