How to Adjust Module Trigger Value

Video Tutorial

Loading...

Connect the Module

• The module can only be used after wiring and entering the following command.

Enable Leveling Module

• Send SET_PIN PIN=_probe_ready VALUE=1 in the Klipper console, observe the trigger indicator light, and then enter the command below:
• After entering this command, you can touch the nozzle with a metal object. If the indicator light turns on, it indicates normal triggering.
• For non-metallic items, please note the hotend temperature.

SET_PIN PIN=_probe_ready VALUE=1

Loading...

Adjust Pressure Value

• Configure using the Configuration Tool
• Connect the module to the computer using a USB data cable, open the serial port tool assistant, select the corresponding port number, and click Connect.

Loading...