System Introduction
System Image Flashing
SSH connection
SSH is used to remotely log in to the FLYOS-FAST host computer from a PC to execute system configuration, firmware compilation, log viewing, and maintenance commands. For daily operations, network SSH should be prioritized; the serial terminal is mainly used for emergency login when the device is not yet networked or the network is abnormal.
System Configuration Guide
This guide is used to set up the device platform, network, printing environment, screen, camera, and CAN communication for FLYOS-FAST. The system services for H3, H5, and H618 are used in a similar way, but hardware-related options cannot be copied across platforms.
Static IP Configuration
Starting from FlyOS-Fast v1.3.9, the wired Ethernet port supports automatic detection of direct PC connections or routers. If the device's Ethernet port is directly connected to a PC, wait approximately 15 seconds and access the device via 10.10.10.1 or local.klipper.cn; manual static IP configuration is generally not required for direct connection scenarios.
World Time Zone Comparison Table
- Fill in the time zone ID in the time zone settings.localtimeIn the configuration item, for example:Asia/Shanghai。