System Update Log

info

• If you encounter any problems while using this system, please provide feedback in the after-sales group.

PI, PI V2, Gemini, C8 System Update Log

v2

• 2022-1
• Changed the distribution to Bullseye
• Updated the kernel to version 5.10.85
• Pre-installed Klipper, Moonraker, Fluidd, Mainsail, KlipperScreen
• Klipper runs in a Python3 environment, resolving issues with Chinese filenames
• Modified the boot partition to FAT format, allowing configuration files to be edited directly in Windows
• Added FLY-Config, a new configuration system
• Added CatSerial, visit http://ip:9999 to view all connected serial devices

v2.1

• Fixed an issue where CatSerial would error when no devices were connected

v2.2

• Added BL firmware for Gemini series motherboards, see documentation for flashing

v2.4

• Fixed missing parts of the flashing environment for Klipper
• Modified configuration templates
• Added support for mJpg cameras
• Added pin configuration for V1 and V1.1 motherboards. Switch in FLY_Config

v2.9

• Added support for Gemini v2
• Improved CAN support
• Plug-and-play support for CAN devices
• Modified gs_usb kernel module
• Fixed issue where kernel updates via apt update/apt upgrade caused boot failures

v2.9.3

• Adapted for FLY-Π
• Pre-installed kernel sources and headers
• Updated the system environment
• Added public key for private APT repository
• Installed PolicyKit rules for Moonraker
• Fixed udev rule conflicts
• Fixed klipper flash errors caused by missing libusb library
• Fixed issue where FLY-Tools static resources could not be loaded
• Changed default motherboard model to Gemini v2
• Modified default serial in printer.cfg to /dev/ttyACM0
• Increased default CAN send buffer size to 1024

v2.9.4

• Removed pre-installed kernel sources and headers (future releases will distribute via deb packages)
• Fixed issue where RTL88XXau driver could not be mounted

v2.9.5

• Added WiFi network management for KlipperScreen
• Fixed other issues

v2.9.6

• Added support for EMMC and WIFI modules
• Deprecated mjpg-streamer, replaced with crowsnest
• Fixed other issues

v2.9.7

• Fixed issue where KlipperScreen would not start
• Optimized the WiFi driver (eliminated issues such as WiFi connection failure, disconnection, and instability)
• Optimized the file system

v3

• Added support for FLY-Gemini v3 motherboard
• Added automatic flashing script based on Gemini v3 motherboard

v3.1

• Added support for FLY-Pi-V2 motherboard
• Updated FLY-Tools
• Default CAN speed set to 1M

v3.1.1

• Fixed automatic expansion issue

v3.3.3

• Updated FLY Tools
• Updated system environment
• Updated FLY-Config, renamed to FlyOS-Env, a new configuration system

v3.3.4

• Optimized the file system
• Added TFT screen rotation
• Added shutdown pin setting
• Updated all system components
• Added support for FLY TOOLS to modify system configurations

MINI Pad, lite2 System Update Log

v1(beta)

• 2023-6
• Distribution: Bullseye
• Kernel version: 5.10.85-v3.0
• Pre-installed Klipper, Moonraker, Fluidd, Mainsail
• Default web interface is fluidd, port 81 opens mainsail
• Klipper uses Python3 environment, resolves issues with Chinese filenames
• Boot partition is FAT, allowing configuration files to be edited directly in Windows

v2(beta)

• 2023-7-25
• Added Chinese font support
• Fixed accelerometer usage

v3(beta)

• Added support for FLY-MINI-Pad

V4(beta)

• Fixed accelerometer usage
• Added TFT screen rotation
• Added shutdown pin setting
• Updated all system components
• Added support to disable HDMI output
• Added support for FLY TOOLS to modify system configurations