Extend Control Drive LED via Plugin
Original document
https://github.com/julianschill/klipper-led_effect
Installation
Please connect to your host computer via WIFI using SSH tools such as MobaXterm_Personal, and ensure the following:
- Ensure the Klipper firmware is installed on the host computer
- Ensure the logged-in user is the one who has installed Klipper
- Ensure your input method is English
- Ensure your host computer can detect the device normally
- Ensure all the above points are followed, otherwise the next step cannot be performed
- This plugin is already included in the
FAST
system
This module can be installed into an existing Klipper installation using the installation script.
cd ~
git clone https://github.com/julianschill/klipper-led_effect.git
cd klipper-led_effect
./install-led_effect.sh
Reference Configuration
[neopixel TP_led]
pin: PB7
chain_count: 25
# Number of LEDs
# LED count
color_order: GRB
initial_RED: 0.4
initial_GREEN: 0.8
initial_BLUE: 1
initial_WHITE: 0.0
#66CCFF
[led_effect sb_nozzle_cooling]
autostart: false
frame_rate: 24
leds:
neopixel:TP_led (9,10)
layers:
breathing 3 1 top (0.0, 0.0, 1.0, 0.1)
[led_effect rainbow]
leds:
neopixel:TP_led
autostart: true
frame_rate: 24
layers:
gradient 0.3 1 add (0.3, 0.0, 0.0),(0.0, 0.3, 0.0),(0.0, 0.0, 0.3)
Loading...